Recommended for: Motorsport Applications
Xtreme Outback Ceramic upgrades have been designed to offer the ultimate in heat capacity for single plate upgrades and are designed specifically for motorsport applications such as endurance rally events and time trials. Available in Sprung Ceramic and Cushioned Ceramic, there are a wide variety of options to choose from depending on the vehicle use.
- Torque capacity 770Nm
- Clamp load 1000Kg 20% Increased over standard
- Cushioned Ceramic Friction Disc
- Heavy Duty Pressure Plate
- Kit contains everything you need for a successful installation + accessories
Designed and Engineered to handle the toughest conditions on the planet, Xtreme Outback Clutch Kits are the ultimate 4×4 heavy duty upgrade for the street and offroad.
Each Xtreme Outback clutch kit is designed and developed to offer the ultimate balance between performance, durability and drivability. As used by motorsport teams and armoured car manufacturers across the globe, Xtreme Outback clutch kits can be trusted to get you there… and back again.
Cushioned ceramic friction discs are similar to the sprung ceramic kits in that they have a sprung hub to absorb shock loading, but also have a small amount of cushioning betwene the two friction surfaces on the disc giving them better pedal modulation. These kits are designed for low speed trial where pedal feel is important but where the high temperature capacity of a ceramic disc is also beneficial.
Xtreme Outback upgrade kits are available with everything you need for a successful installation + accessories you may want to upgrade or replace while the gearbox is out of the vehicle.
Which stage do I need?Clutch finder – the right clutch for how you drive
The ending of the part number tells you the stage. Choose only as strong as needed: every step up also means more load on all system components (clutch cylinders, lines, pedal mounting etc.).
| Your use | Matching stage |
|---|---|
| Everyday & off-roadStock engine or mild upgrades, bigger tyres, lots of off-road driving | Stage 1 · Heavy Duty, organic (-1A)Smooth engagement, more clamp load than the factory clutch – the exact value is listed for each set. |
| Towing & payloadOften close to the towing limit, fully loaded travel vehicle | Stage 1 (-1A) is usually enoughWith extra engine power on top: stage 1X (-1AX). |
| More powerSignificant tuning and performance upgrades | Stage 1X · Extra Heavy Duty, organic (-1AX)Considerably more clamp load, higher load on all components. For some vehicles also with dual friction disc (-1DX). |
| CompetitionTrial, desert racing, track | Stage 2 · ceramic (-1B sprung, -1C cushioned); stronger: 2X (-1BX, -1CX) and Race (-1R)Highest heat capacity, built for motorsport.This kit |
Tip: Planning more power soon? Then take the stronger stage now – the gearbox is out anyway when the clutch is changed.
What the endings mean
-1AStage 1 – Heavy Duty, organic-1AXStage 1X – Extra Heavy Duty, organic-1DXStage per kit – Extra Heavy Duty, dual friction (organic + ceramic)-1BStage 2 – Heavy Duty, sprung ceramic-1CStage 2 – Heavy Duty, cushioned ceramic-1BX / -1CXStage 2X – Extra Heavy Duty, ceramic-1RStage 2R – Race, sprung ceramic
Clamp load figures as stated by the manufacturer, compared with the factory clutch. Exact values for your vehicle are in the table of each kit. Not sure? Ask us.
Good to know
- More load on the system: more clamp load also puts more stress on clutch cylinders, lines and pedal mounting.
- Single mass flywheel: it does not damp the torsional irregularities of the engine – a bit more vibration when pulling away (clutch judder) is normal for this design.
Clutch FAQ
Which stage do I need?
For everyday driving, off-road and towing, stage 1 (-1A) is usually enough. With a clear power increase take stage 1X (-1AX). Ceramic (stage 2) is meant for competition.
Does a stronger clutch put more load on other parts?
Yes. A stronger pressure plate clamps the disc harder, so clutch cylinders, lines and pedal mounting are under more load – with stage 1X more than with stage 1.
Does a single mass flywheel vibrate more?
It can. A dual mass flywheel damps the torsional irregularities of the engine, a single mass flywheel does not. A bit more vibration when pulling away and engaging the clutch is therefore normal for this design.
What should I check while the clutch is out?
Flywheel (friction surface, cracks), pilot bearing, release fork and pivot ball, master and slave cylinder and the rear crankshaft seal. The gearbox is out anyway.
What is in the kit?
It is listed for every kit in the table under "In the kit". Typical are pressure plate, clutch disc, release bearing, pilot bearing and alignment tool; some kits also come with a flywheel and bolts.
Is a ceramic clutch suitable for the road?
Ceramic kits are made for motorsport (trial, desert racing, track). For street, off-road and towing the manufacturer recommends the organic stages 1 and 1X.




















