Stage 2 · ceramic

Clutch Kit – Xtreme Outback Heavy Duty Sprung Ceramic 700Nm 900Kg (40% inc.)

Code: KTY28010-1B

Clutch Kit – Xtreme Outback Heavy Duty Sprung Ceramic 700Nm 900Kg (40% inc.). Fits Toyota Land Cruiser (70, 80 Series). Xtreme Outback — Australian clutch and driveline engineering for heavy-duty 4×4 use.

785,00 €

Currently out of stock

Fitting at a glance
Dimensions
Clutch disc diameter275 mm
Spline diameter28 mm
Guide values based on manufacturer data.
Xtreme Outback – Heavy duty sprung ceramic kit /-1B

Recommended for: Motorsport Applications

Xtreme Outback Ceramic upgrades have been designed to offer the ultimate in heat capacity for single plate upgrades and are designed specifically for motorsport applications such as endurance rally events and time trials. Available in Sprung Ceramic and Cushioned Ceramic, there are a wide variety of options to choose from depending on the vehicle use.

Specifications:
  • Torque capacity 700Nm
  • Clamp load 900Kg 40% Increased over standard
  • Ceramic Friction Disc
  • Heavy Duty Pressure Plate
  • Kit contains everything you need for a successful installation + accessories
Xtreme Outback

Designed and Engineered to handle the toughest conditions on the planet, Xtreme Outback Clutch Kits are the ultimate 4×4 heavy duty upgrade for the street and offroad.

Each Xtreme Outback clutch kit is designed and developed to offer the ultimate balance between performance, durability and drivability. As used by motorsport teams and armoured car manufacturers across the globe, Xtreme Outback clutch kits can be trusted to get you there… and back again.

What’s in the Box?

Xtreme Outback upgrade kits are available with everything you need for a successful installation + accessories you may want to upgrade or replace while the gearbox is out of the vehicle.

Which stage do I need?Clutch finder – the right clutch for how you drive

The ending of the part number tells you the stage. Choose only as strong as needed: every step up also means more load on all system components (clutch cylinders, lines, pedal mounting etc.).

Your useMatching stage
Everyday & off-roadStock engine or mild upgrades, bigger tyres, lots of off-road drivingStage 1 · Heavy Duty, organic (-1A)Smooth engagement, more clamp load than the factory clutch – the exact value is listed for each set.
Towing & payloadOften close to the towing limit, fully loaded travel vehicleStage 1 (-1A) is usually enoughWith extra engine power on top: stage 1X (-1AX).
More powerSignificant tuning and performance upgradesStage 1X · Extra Heavy Duty, organic (-1AX)Considerably more clamp load, higher load on all components. For some vehicles also with dual friction disc (-1DX).
CompetitionTrial, desert racing, trackStage 2 · ceramic (-1B sprung, -1C cushioned); stronger: 2X (-1BX, -1CX) and Race (-1R)Highest heat capacity, built for motorsport.This kit

Tip: Planning more power soon? Then take the stronger stage now – the gearbox is out anyway when the clutch is changed.

What the endings mean

  • -1A Stage 1 – Heavy Duty, organic
  • -1AX Stage 1X – Extra Heavy Duty, organic
  • -1DX Stage per kit – Extra Heavy Duty, dual friction (organic + ceramic)
  • -1B Stage 2 – Heavy Duty, sprung ceramic
  • -1C Stage 2 – Heavy Duty, cushioned ceramic
  • -1BX / -1CX Stage 2X – Extra Heavy Duty, ceramic
  • -1R Stage 2R – Race, sprung ceramic

Clamp load figures as stated by the manufacturer, compared with the factory clutch. Exact values for your vehicle are in the table of each kit. Not sure? Ask us.

Good to know

  • More load on the system: more clamp load also puts more stress on clutch cylinders, lines and pedal mounting.

Clutch FAQ

Which stage do I need?

For everyday driving, off-road and towing, stage 1 (-1A) is usually enough. With a clear power increase take stage 1X (-1AX). Ceramic (stage 2) is meant for competition.

Does a stronger clutch put more load on other parts?

Yes. A stronger pressure plate clamps the disc harder, so clutch cylinders, lines and pedal mounting are under more load – with stage 1X more than with stage 1.

What should I check while the clutch is out?

Flywheel (friction surface, cracks), pilot bearing, release fork and pivot ball, master and slave cylinder and the rear crankshaft seal. The gearbox is out anyway.

What is in the kit?

It is listed for every kit in the table under "In the kit". Typical are pressure plate, clutch disc, release bearing, pilot bearing and alignment tool; some kits also come with a flywheel and bolts.

Is a ceramic clutch suitable for the road?

Ceramic kits are made for motorsport (trial, desert racing, track). For street, off-road and towing the manufacturer recommends the organic stages 1 and 1X.

Technical data

StageStage 2 · Heavy Duty, sprung ceramic (part no. ending -1B)
Friction discSprung ceramic disc
DesignSingle plate
Clamp load900 kg · +40 % vs. factory clutch
Disc diameter275 mm
Spline10 splines · Ø 28 mm
Flywheel step+0.5mm
Recommended forHigh Speed 4×4 Trial or Desert Race – Stage 2
Engine3F 3956 Petrol 110 kW
3F-E 3956 Petrol 112 kW
NoteFrom 01/1990
Weight10.18 kg

Motorisierung

  • 3F 3956 Petrol 110 kW 150 BHP (1984.11 - 1989.12)
  • 3F 3956 Petrol 110 kW 150 BHP (1984.11 - 1991.12)
  • 3F 3956 Petrol 110 kW 150 BHP (1984.11 - 1992.10)
  • 3F 3956 Petrol 110 kW 150 BHP (1990.01 - 1992.07)
  • 3F-E 3956 Petrol 112 kW 152 BHP (1990.01 - 1992.07)

Hinweise

From 01/1990

Compatible vehicles

  • Toyota Land Cruiser 70 (1984-1992) – 4.0 4x4 (FJ70RV. FJ75RV)
  • Toyota Land Cruiser 70 (1984-1991) – 4.0 4x4 (FJ73_V. FJ73RV)
  • Toyota Land Cruiser 70 (1984-1989) – 4.0 4x4 (FJ75_P. FJ75RP)
  • Toyota Land Cruiser 80 (1990-1992) – 4.0 (FJ80)