3.5″ Jeep Wrangler JLU Metalcloak Game-Changer Lift Kit

Code: A2235

The Game-Changer 3.5" for the Jeep JL Wrangler is a suspension system designed to function as a complete unit: offering a wide range of travel, stable handling, and optimal geometry when the vehicle is lifted. This isn’t just a “spring kit”—you get the key components for axle alignment and suspension performance.

MetalCloak — off-road suspension and armor from the USA.

3.919,00 €

In stock – delivery approx. 3–10 working days

In stock – delivery approx. 3–10 working days

MetalCloak Jeep JL Wrangler 3.5″ Game-Changer Suspension & Lift Kit – compatibility: Jeep JL Wrangler (important: for the complete kit, you’ll need shock absorbers or a relocation kit for the stock shock mounts)

The Game-Changer 3.5″ for the Jeep JL Wrangler is a suspension system designed to function as a complete unit: offering a wide range of travel, stable handling, and optimal geometry when the vehicle is lifted. This isn’t just a “spring kit”—you get the key components for axle alignment and suspension performance.

The kit is based on Duroflex joints, True Dual Rate springs, and control arms with Durotrak bushings. You can choose shock absorbers to match your build (MetalCloak offers various configurations—including an option without shocks if you want to use your own).

Platform

Jeep JL Wrangler

Lift Height

3.5″ (lift system)

Kit Type

Mid-arm, complete axle alignment (Game-Changer)

Shock Absorbers

Your choice (various options) or a version without shock absorbers

Key Benefits

• Greater suspension travel (UP and DOWN) and axle control with a 3.5″ lift.
• Adjustable control arms with Duroflex joints: self-centering, vibration damping, and a wide range of articulation without the “stiffness” typical of many joints.
• True Dual Rate springs: on-road stability and control under load, combined with off-road freedom of movement.
• Durotrak-sleeved control arms: NVH (noise/vibration) reduction, while allowing vertical movement without unnecessary stress and keeping the axle aligned with the vehicle’s chassis.
• Adjustable front/rear bump stops: adjust travel to match your vehicle’s configuration and tire size without removing the springs.
• Freedom to choose shock absorbers: you can select the manufacturer’s recommended set or use your own solution.

True Dual Rate – how the spring works (animation)

Dual-rate in practice: stable performance around ride height and control at full compression/bounce. Durotrak – installation and operation of the bushings (GIF)

The two-piece design facilitates installation (no press required) and is intended to reduce vibration transfer. What’s Included

• Adjustable control arms with Duroflex joints.
• True Dual Rate springs (front and rear).
• Front lower coil correction pads.
• Motor-specific front coil isolators.
• Front and rear Panhard bars / track bars with Durotrak bushings.
• Adjustable front and rear bump stops.
• Front and rear stabilizer bar links.

Kit Contents – Component Overview

Schematic view of kit components (actual parts depend on configuration/options). Technical Specifications / Facts

• Control arms: 1 1/2″ x .187″ and 1 5/8″ x .25″ DOM steel tubes.
• Duroflex joints: vulcanized elastomer with DuPont™ Kevlar® fiber.
• True Dual Rate springs: high-strength chrome steel.
• Spring isolators: thermoset elastomer.
• Track bars: 4130 Solid Chromoly.
• Durotrak bushings: vulcanized elastomer (MetalCloak’s proprietary compound).
• Adjustable front/rear bump stops: thermoset elastomer.
• Steel component coating: Gold Zinc.

Comparison of Joint Settings – Why Alignment Matters

Illustrative comparison of the geometry/alignment of control arm joints. Forged ends – for adjustment and strength

Forged threaded ends—for precise adjustment and off-road use. Front lower control arm—drawing and dimensions (SKU 7601)

Technical drawing showing basic dimensions and adjustment range. Front upper control arm – drawing and dimensions (SKU 7602)

Illustrative technical drawing of a kit component. Rear lower control arm – drawing and dimensions (SKU 7003)

Technical drawing of the rear control arm – key parameters. Rear upper control arm – drawing and dimensions (SKU 7004)

Illustrative technical drawing of the rear control arm. Articulation – Duroflex vs. typical connections

Illustrative range of movement for the Duroflex joint. Articulation – comparative example

Illustrative comparison – how the maximum range of movement changes. Springs – front specifications

Drawing/specifications for the front spring from the kit. Springs – rear specifications

Drawing/specifications for the rear spring from the kit. Front spring lower adjusters

This component ensures proper spring alignment and facilitates installation. Spring isolators

Elastomer isolators—designed to work with the spring kit. Front track bar—forged end and installation

Forged end and mounting geometry—optimized for ground clearance and travel. Front track bar—specifications and ground clearance

Illustration showing the profile and key components. Rear track bar—specifications

Drawing/specifications for the rear track bar. Adjustable front bump stops

Height adjustment of bump stops without disassembling the suspension. Adjustable rear bump stops

Height-adjustable rear bump stops—tailored to the vehicle’s configuration. Who it’s for / Application

• For those building a Jeep JL Wrangler for off-road use and expeditions where suspension travel and axle alignment matter.
• For vehicles with larger tires that require adjustment of travel limits (adjustable bump stops).
• For drivers who want to select shock absorbers suited to their driving style: from “daily + weekend” use to rougher terrain.
• For those who want the ability to precisely adjust geometry (adjustable control arms).

Installation / Notes

• With long suspension travel, stock driveshafts can wear out quickly under extreme articulation—an aftermarket driveshaft may be needed.
• The manufacturer recommends having the suspension alignment/toe-in adjusted by a suspension specialist after installation.
• The manufacturer does not recommend powder coating True Dual Rate springs.
• If you choose your own shock absorbers, the manufacturer does not ensure compatibility with the system.
• Information from the configurator: For OE wheels, 2″ spacers may be required for proper ground clearance (depending on backspacing).
• Note from the configurator: Stock backspacing may not fit the Diesel JL Wrangler.

Shock Mount – Spacer (GIF)

This component ensures proper shock operation with a long stroke and adequate ground clearance. Shocks – Options and Supporting Materials (Product GIFs)

• The system is designed for various shock absorber configurations (including an option without shock absorbers, if you want to choose your own).
• Below are product images and animations demonstrating the operation of selected suspension and adjustment solutions.

RockSport – Operation/Suspension (GIF)

An illustrative animation of the shock’s operation during the compression/rebound cycle. RockSport Slate – Damping (GIF)

Compression animation – illustrates the shock’s operating cycle. RockSport Silver 2.0 – Damping (GIF)

Illustration: the compression/rebound cycle in the 2.0 shock absorber. RockSport Black Adjustable Reservoir – compression adjustment (GIF)

Illustrative animation showing the compression adjustment mechanism in the adjustable version. 6Pak – operating range (GIF)

Illustration: the operating cycle of the 6Pak system in the context of long travel. Rear Geometry Option (DB3) and Link Mount – Illustrative Materials

• The configurator includes an option to adjust rear geometry via DB3 (drop bracket)—designed to limit “rear steer” and improve suspension performance in the UP/DOWN range.
• The configurator also includes an option to relocate the rear track bar mounting (rear track bar relocation bracket) for improved geometry and operation without colliding with the frame.

DB3 – Rear Geometry Adjustment (GIF)

Illustration: the difference in control arm alignment and its effect on axle movement. DB3 – material from the configurator (GIF)

This GIF file appears in the product configurator as a preview of the rear geometry options. DB3 – installation photo

Overview: the part installed on the vehicle. Rear track bar relocation – installation

Overview: mounted in place of the factory bracket, no welding required. Rear track bar relocation – illustrative graphic

Illustration of the track bar relocation component. Comparison with competitors – product graphic

Graphic material linked on the product page (comparison). Summary (for content scanning)

• 3.5″ lift for the Jeep JL Wrangler, designed for long travel and geometry control.
• Duroflex + True Dual Rate + Durotrak = a kit focused on suspension performance, stability, and comfort.
• Adjustable front/rear bump stops allow you to tailor the travel limit to your vehicle’s configuration.
• You can choose shock absorbers to match your build (various options or your own).

Included in the kit

Part
Adjustable control arms with Duroflex joints
True Dual Rate springs (front and rear)
Front lower coil correction pads
Motor-specific front coil isolators
Front and rear Panhard bars / track bars with Durotrak bushings
Adjustable front and rear bump stops
Front and rear stabilizer bar links

Compatible vehicles

  • Jeep Wrangler JL 2-door (All years)
  • Jeep Wrangler JL 4-door (All years)
  • Jeep Wrangler JL 4xe (All years)